DYNATRON/BONDO CORP -- 921 BLACK SILICONE RUBBER  -- 8030-00F019990
<pre>=====================  Product Identification  =====================

Product ID:921 BLACK SILICONE RUBBER
MSDS Date:07/09/1988
FSC:8030
NIIN:00F019990
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PKY NW
City:ATLANTA
State:GA
ZIP:30331-1098
Info Phone Num:(404) 696-2730 OR (800) 241-3386
Emergency Phone Num:(404) 696-2730 OR 971-1502
Preparer's Name:S. ABDUL RAZZAK
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETOXYSILANE
Fraction by Wt: <5%
Other REC Limits:10 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, PAIN, REDNESS, &
    CORNEAL INJURY. SKIN: REDNESS, IRRITATION, & MILD BURNS.
    INHALATION: RESPIRATORY TRACT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION, PAIN, REDNESS, & CORNEAL
    INJURY. SKIN: REDNESS, IRRITATION, & MILD BURN. INHALATION:
    RESPIRATORY TRACT IRRITATION.
Medical Cond Aggravated by Exposure:SKIN & RESPIRATORY DISORDERS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
    WATER. INHALATION: REMOVE TO FRESH AIR. IF BREATHING STOPS
    ADMINISTER ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT,
    ADMINISTER OXYGEN . INGESTION: DON'T INDUCE VOMITING. OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>250F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER, OR WATER FOG
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
    PROTECTIVE CLOTHING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. REMOVE W/IENRT ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE <90F. USE W/ADEQUATE
    VENTILATION.
Other Precautions:AVOID CONTACT W/SKIN/EYES. AVOID BREATHING VAPORS.
    AIR MOISTURE MAY CAUSE FORMATION OF ACETIC ACID FUMES.

=============  Exposure Controls/Personal Protection  =============

Ventilation:MECHANICAL/GENERAL: SUFFICIENT IN VOLUME & PATTERN TO KEEP
    <TLV.
Protective Gloves:RUBBER OR PLASTIC
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. WASH HANDS AFTER EVERY USAGE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F
Vapor Pres:<5
Spec Gravity:1.05
Evaporation Rate &amp; Reference:(ETHER = 1): <1
Solubility in Water:<0.1%
Appearance and Odor:PASTE FORM W/ACETIC ACID ODOR
Percent Volatiles by Volume:<5/WT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:AIR & MOISTURE
Hazardous Decomposition Products:SILICON DIOXIDE, CO, & CO2

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.