DYNATRON/BONDO CORP -- 903 WHITE PLASTIC RUBBER  -- 8030-00F020060
<pre>=====================  Product Identification  =====================

Product ID:903 WHITE PLASTIC RUBBER
MSDS Date:06/25/1988
FSC:8030
NIIN:00F020060
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PKY NW
City:ATLANTA
State:GA
ZIP:30331-1098
Info Phone Num:(404) 696-2730 OR (800) 241-3386
Emergency Phone Num:(404) 696-2730 OR 971-1502
Preparer's Name:S. ABDUL RAZZAK
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: >50%
Other REC Limits:100 PPM
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
    HEADACHE, DIZZINESS, NAUSEA, ANESTHESIA, NOSE IRRITATION, PERMANENT
    BRAIN & NERVOUS SYSTEM DAMAGE. INGESTION: HARMFUL OR FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION. INHALATION: HEADACHE,
    DIZZINESS, NAUSEA, ANESTHESIA, NOSE IRRITATION, PERMANENT BRAIN &
    NERVOUS SYSTEM DAMAGE. INGESTION: HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:SKIN, RESPIRATORY, CENTRAL NERVOUS
    SYSTEM, LIVER & KIDNEY DISORDERS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
    WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. IF
    BREATHING IS STOPPED GIVE CPR. INGESTION: DON'T INDUCE VOMITING.
    OBTAIN ME DICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:45F
Lower Limits:1.2%
Upper Limits:7%
Extinguishing Media:FOAM, DRY POWDER, OR CO2
Fire Fighting Procedures:DON'T USE WATER UNLESS SPECIAL FOGGING
    SYSTEMS.
Unusual Fire/Explosion Hazard:VAPORS MAY CAUSE FLASH FIRES & MAY IGNITE
    EXPLOSIVELY. IF IN CLOSED CONTAINERS, HEAT WILL CAUSE BUILDUP OF
    PRESSURE. WATER CAN BE USED TO COOL CONTAINERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELMINATE IGNITION SOURCES. CLEAN-UP
    W/NON-SPARKING TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID BREATHING OF VAPORS. VAPORS MAY
    IGNITE EXPLOSIVELY. AVOID CONTACT W/SKIN OR INGESTING. KEEP OUT OF
    REACH OF CHILDREN. DON'T SMOKE.
Other Precautions:CLOSE CONTAINER AFTER EACH USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY NECESSARY
Ventilation:LOCAL EXHAUST
Protective Gloves:NITRILE RUBBER
Eye Protection:SAFETY GLASSES W/SIDESHIELDS
Other Protective Equipment:PROTECTIVE CREAMS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:230F
Vapor Pres:38
Vapor Density:>AIR
Spec Gravity:1.1
Evaporation Rate &amp; Reference:(BU AC = 1): 1.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE W/TOLUENE ODOR
Percent Volatiles by Volume:>50/WT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, HEATERS,
    ELECTRIC MOTORS & OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBONS &
    HYDROGEN CHLORIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS. USED EMPTY TUBES SHOULD BE COLLECTED IN A
    DESIGNATED CONTAINER & SHOULD BE DISPOSED IN A LANDFILL. REPLACE
    CAPS ON USED TUBES BEFORE PLA CING IN CONTAINER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.