DYNATRON/BONDO CORP -- 660 EPOXY REPAIR KIT PART A  -- 8030-00F020062
<pre>=====================  Product Identification  =====================

Product ID:660 EPOXY REPAIR KIT PART A
MSDS Date:06/18/1988
FSC:8030
NIIN:00F020062
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PKY NW
City:ATLANTA
State:GA
ZIP:30331-1098
Info Phone Num:(404) 696-2730 OR (800) 241-3386
Emergency Phone Num:(404) 696-2730 OR 971-1502
Preparer's Name:S. ABDUL RAZZAK
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,	       
    ARALDITE 6004, 4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN
CAS:25068-38-6
RTECS #:KD4380000
Fraction by Wt: >50%

Ingred Name:4-NONYLPHENOL
CAS:104-40-5
RTECS #:SM6530000
Fraction by Wt: <10%

Ingred Name:TALC (POWDER), (ASBESTOS FREE), TALCUM, MAGNESIUM SILICATE
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: <40%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/CUM (RESP DUST)

Ingred Name:SILICON DIOXIDE
CAS:7631-86-9
RTECS #:VV3100000
Fraction by Wt: <40%
OSHA PEL:80 MG/CUM

Ingred Name:SILICA GEL, CHROMAROD SII, DYNAGROUT SB, FRACTOSIL 500,
    GASIL, GEMODEZ, KIESELGEL, LICHROPREP, NEOBEAD, POLYPOR
CAS:63231-67-4
RTECS #:VV7340000
Fraction by Wt: <40%
OSHA PEL:20 MPPCF

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL (RAT) LD50: >5000 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: IRRITATION,
    SENSITIZATION & DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION,
    SENSITIZATION & DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY, ACZEMA OR SKIN CONDITIONS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH
    THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE
    OXYGEN  OR CPR IF NEEDED. INGESTION: GIVE LARGE AMOUNTS OF WATER &
    INDUCE VOMITING . OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:490F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL & WATER SPRAY
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
    BE TOXIC.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID ALL PERSONAL CONTACT. WIPE W/RAG FOR
    SMALL SPILLS. FOR LARGER SPILLS USE ABSORBENT MATERIAL. COLLECT
    WASTE IN DESIGNATED CONTAINER. FLUSH CONTAMINATED AREA W/WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY AREA IN CLOSED
    CARTRIDGE. AVOID BREATHING VAPORS. USE ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY NECESSARY
Ventilation:MECHANICAL/LOCAL EXHAUST
Protective Gloves:RUBBER OR POLYETHYLENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:BARRIER CREAMS, FULL PROTECTIVE CLOTHING &
    DISPOSABLE CONTAINERS/PAPER ON WORK AREA
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. WASH HANDS THOROUGHLY AFTER EVERY USE.
Supplemental Safety and Health
LD50 DATA IS FOR BISPHENOL A DIGLYCIDAL ETHER RESIN.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:392F
Vapor Pres:1
Spec Gravity:1.20
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK VISCOUS W/EPOXY ODOR
Percent Volatiles by Volume:0%/WT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, STRONG ACIDS OR BASES IN BULK
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:CO, CO2, ALDEHYDES OR OTHER ORGANICS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.