DYNATRON/BONDO CORP -- 426 MILLED FIBERGLASS  -- 8030-00F020118
<pre>=====================  Product Identification  =====================

Product ID:426 MILLED FIBERGLASS
MSDS Date:06/04/1988
FSC:8030
NIIN:00F020118
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PKY NW
City:ATLANTA
State:GA
ZIP:30331-1098
Info Phone Num:(404) 696-2730 OR (800) 241-3386
Emergency Phone Num:(404) 696-2730 OR 971-1502
Preparer's Name:S. ABDUL RAZZAK
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:GLASS, OXIDE
CAS:65997-17-3
Fraction by Wt: 100%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: IRRITATION &
    TRANSITORY DERMAITITIS. INHALATION: IRRITATION OF MOUTH, NOSE,
    THROAT & RESPIRATORY TRACT INFECTION. INGESTION: NON-TOXIC.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION & TRANSITORY
    DERMATITIS. INHALATION: IRRITATION OF NOSE, THROAT, MOUTH &
    RESPIRATORY TRACT INFECTION. INGESTION: NON-TOXIC.
Medical Cond Aggravated by Exposure:SKIN DISORDERS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR LEAST 15 MINS. SKIN: WASH
    W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER, FOAM, CO2 & DRY CHEMICAL
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS & FULL
    PROTECTIVE GEAR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT BY VACUUM OR WET METHODS TO PREVENT
    DUST GENERATION.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE, HANDLE & USE PRODUCT IN A
    MANNER WHICH WILL MINIMIZE DUST GENERATION. STORE MATERIAL IN A DRY
    AREA TO AVOID PRODUCT DAMAGE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED W/DUST FILTERS OR DUST MASK.
Protective Gloves:RUBBER SURGICAL TYPE
Eye Protection:SAFETY GLASSES W/SIDESHIELDS
Other Protective Equipment:FULL PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. WASH WORK CLOTHES SEPARATELY & WIPE OUT WASHER AFTER USE.
Supplemental Safety and Health
WASH HANDS W/SOAP & WATER AFTER EVERY USE & SHOWER AT THE END OF THE
    DAY.

==================  Physical/Chemical Properties  ==================

Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE TO OFF WHITE MATERIAL W/NO ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.