DYNATRON/BONDO CORPORATION -- 943 EPOXY WOOD REPAIR  -- 8030-00F020123
<pre>=====================  Product Identification  =====================

Product ID:943 EPOXY WOOD REPAIR
MSDS Date:07/16/1988
FSC:8030
NIIN:00F020123
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORPORATION
Address:3700 ATLANTA INDUSTRIAL PARKWAY N W
City:ATLANTA
State:GA
ZIP:30331-1098
Info Phone Num:(404) 696-2730 OR (800) 241-3386
Emergency Phone Num:(404) 696-2730 OR 671-1502
Preparer's Name:S ABDUL RAZZAK
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,	       
    ARALDITE 6004, 4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN
CAS:25068-38-6
RTECS #:KD4380000
Fraction by Wt: <25%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RAT): >10,000 MG/KG
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION & SENSITIZATION.
    EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION & SENSITIZATION. EYES:
    IRRITATION.
Medical Cond Aggravated by Exposure:SKIN DISORDERS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
    WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
    INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER SPRAY, ALCOHOL FOAM, CO2, OR DRY CHEMICALS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP IN NORMAL MANNER.

======================	Handling and Storage  ======================

Other Precautions:AVOID CONTACT W/EYES & SKIN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AS REQUIRED
Ventilation:LOCAL EXHAUST IF HEATED >100F
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:WASH HANDS W/SOAP & WATER AFTER EVERY USAGE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.90
Solubility in Water:INSOLUBLE
Appearance and Odor:OFF WHITE W/MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:MIXING A LARGE MASS OF MATERIAL MAY
    GENERATE EXCESSIVE HEAT DUE TO EXOTHERMIC REACTION.
Hazardous Decomposition Products:CO, ALDEHYDES, ACIDS, OXIDES OF SULFUR
    & NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.