DYNATRON/BONDO CORP -- DYNA-HAIR, 472  -- 8030-00N022728
<pre>=====================  Product Identification  =====================

Product ID:DYNA-HAIR, 472
MSDS Date:07/28/1990
FSC:8030
NIIN:00N022728
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PARKWAY NW
City:ATLANTA
State:GA
ZIP:30331
Country:US
Info Phone Num:404-696-2730; 800-241-3386
Emergency Phone Num:404-696-2730;800-424-9300(CHEMTREC)
Preparer's Name:M WHEELOCK
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:FIBROUS GLASS
CAS:65997-17-3
OSHA PEL:5 MG/M3 RDUST
ACGIH TLV:10 MG/M3

Ingred Name:UNSATURATED POLYESTER RESIN
Fraction by Wt: >50%

Ingred Name:STYRENE, MONOMER
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 16%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:INERT POWDERS & FIBERS. CONSISTING OF INGREDIENTS 4, 5, AND
    6.
RTECS #:9999999ZZ
Fraction by Wt: <50%

Ingred Name:TALC; (POWDER) CONTAINING NO ASBESTOS FIBERS
CAS:14807-96-6
RTECS #:WW2700000
OSHA PEL:2 MG/M3 (MFR)
ACGIH TLV:2 MG/M3 (MFR)

Ingred Name:SILICA GEL
CAS:1343-98-2
OSHA PEL:6 MG/M3 (MFR)
ACGIH TLV:6 MG/M3 (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) MAY CAUSE EYE AND SKIN
    IRRITATION. VAPORS MAY CAUSE MUCOUS MEMBRANE IRRITATION AND UPPER
    RESPIRATORY TRACT DISCOMFORT. (CHRONIC) REPEATED EXPOSURE TO HIGH
    CONCENTRATIONS OF VAPOR MAY CAUSE LIV ER AND KIDNEY DAMAGE.
Explanation of Carcinogenicity:STYRENE: CLASS 2B (IARC).
Effects of Overexposure:EYES:MAY CAUSE IRRIT. LIQ SPLASHES MAY RESULT
    IN MORE SERIOUS INJURIES. MAY CAUSE TEARING. SKIN: PRLNGD/FREQUENT
    CONT MAY CAUSE DEFATTING & DRYNESS OF SKIN W/RESULTANT IRRIT & POSS
    DERMAT. STYRENE MAY  BE ABSORBED THRU SKIN IN TOX AMTS. INHAL:VAPS
    MAY CAUSE MUC MEMB IRRIT & UPPER RESP TRACT DISCOMFORT. (SEE SUPP
    DATA)
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH CHRONIC
    RESPIRATORY CONDITIONS (I.E. ASTHMA, CHRONIC BRONCHITIS, EMPHYSEMA,
    ETC) MAY BE ADVERSELY AFFECTED BY ANY FUME OR AIRBORNE PARTICULATE
    MATTER EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
    SEEK IMMEDIATE MEDICAL AID. SKIN: WASH WITH SOAP AND WATER. INHAL:
    REMOVE VICTIM FROM EXPOSURE. IF UNCONSCIOUS, ADMINISTER ARTIFICIAL
    RESPIRAT ION AND/OR OXYGEN AS NEEDED. SEEK MEDICAL AID. INGEST: DO
    NOT INDUCE VOMITING (ASPIRATION HAZARD). SEEK IMMEDIATE MEDICAL
    AID.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:90.0F,32.2C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:CO*2, DRY CHEMICAL (SMALL FIRES); FOAM AND WATER
    FOG (LARGE FIRES).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT . COOL CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURE EXPOSURE FOR EXTENDED
    PERIODS OF TIME WILL RESULT IN SPONTANEOUS UNCONTROLLED EXOTHERMIC
    POLYMERIZATION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENT AREA.
    ABSORB SPILL WITH AN ABSORBENT MATERIAL SUCH AS SAWDUST,
    VERMICULITE OR SAND AND PLACE IN A CLOSED CONTAINER. IF LARGE
    SPILL, DIKE THE AREA TO PREVENT THIS M ATERIAL FROM ENTERING WATER
    SYSTEMS OR SEWERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. AVOID
    PROLONGED OR REPEATED SKIN CONTACT. AVOID INHAL OF VAPORS OR SPRAY
    MISTS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR IF
    PEL OR TLV IS EXCEEDED. APPROPRIATE RESPIRATOR SELECTION DEPENDS
    UPON TYPE AND MAGNITUDE OF EXPOSURE.
Ventilation:GENERAL VENT IS REQUIRED DURING NORMAL USE. LOCAL VENT MAY
    BE REQUIRED DURING CERTAIN OPER TO KEEP EXPOS LEV <LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOGG&FULL LENGTH FACESHLD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING TO PREVENT SKIN
    CONTACT. EYEWASH STATIONS AND SAFETY SHOWERS SHOULD BE AVAILABLE.
Work Hygienic Practices:WASH HANDS WITH SOAP AND WATER AFTER EVERY
    USAGE.
Supplemental Safety and Health
EFTS OF OVEREXP: HIGH CONCENTRATIONS MAY RESULT IN HEADACHE, NAUSEA,
    INSENSIBILITY AND OTHER CNS EFTS. INGEST: MAY CAUSE GI
    DISTURBANCES, PAIN AND DISCOMFORT.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:293F,145C
Vapor Pres:5.2
Vapor Density:3.6
Spec Gravity:1.40+/-0.15
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT BROWNISH, STYRENE ODOR.
Percent Volatiles by Volume:16

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT.
Hazardous Decomposition Products:HEATING OF THIS MATERIAL TO
    DECOMPOSITION MAY CAUSE THE EMISSION OF IRRITATING, ACRID FUMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL REGS, IF
    DISCARDED, MATL & CNTNRS ARE CONSIDERED RCRA HAZ WASTES BASED ON
    CHARACTERISTIC OF IGNITABILITY. FOR FURTHER INFO CONT YOUR ST/LOCAL
    SOLID WASTE AGENCY/UN ITED STATES ENVIRON AGENCY'S RCRA HOTLINE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.