adverstisement



DYNATRON/BONDO CORP -- 462 DYNA-GLASS -- 8010-00N018490
=====================  Product Identification  =====================

Product ID:462 DYNA-GLASS
MSDS Date:02/10/1993
FSC:8010
NIIN:00N018490
MSDS Number: BXWTQ
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTIC INDUSTRIAL PKWY NW
City:ATLANTA
State:GA
ZIP:30331
Country:US
Info Phone Num:404-696-2730
Emergency Phone Num:800-241-3386
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:UNSATURATED POLYESTER RESIN
Fraction by Wt: <30%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:STYRENE; (STYRENE MONOMER) (SARA 313). BP:293F,145C.
    VP:5.2. VAP DENS:3.6. FL PT:90.0F,32.2C.
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 16%
OSHA PEL:100 PPM
ACGIH TLV:S,50 PPM/100 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:INERT MATERIALS; (INERT POWDERS & FIBERS) (CONTAINING INGS
    4,5 & 6)
Fraction by Wt: >50%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS;
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 2%
OSHA PEL:2 MG/M3, RDUST
ACGIH TLV:2 MG/M3, RDUST

Ingred Name:SILICIC ACID (POLYORTHO); (SILICA GEL)
CAS:1343-98-2
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:FIBROUS GLASS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:MATERIAL VOLATILE ORGANIC CONTENT:253 G/L = 2.11 #/GAL
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:90F,32C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL (SM FIRES); FOAM &
    WATER FOG (LG FIRES).
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:HIGH TEMP EXPOS FOR EXTENDED PERIODS OF
    TIME WILL RSLT IN SPONTANEOUS UNCONTROLLED EXOTHERMIC
    POLYMERIZATION.

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:SEE ING 2
Vapor Pres:SEE ING 2
Vapor Density:SEE ING 2
Spec Gravity:1.58
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREEN PASTE, STYRENE ODOR.
Percent Volatiles by Volume:16(WT)

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.