adverstisement
DYNATRON/BONDO CORP -- # 624 TAN POLISHING COMPOUND -- 7930-00N018450
===================== Product Identification =====================
Product ID:# 624 TAN POLISHING COMPOUND
MSDS Date:10/22/1988
FSC:7930
NIIN:00N018450
MSDS Number: BLFQW
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PARKWAY N W
City:ATLANTA
State:GA
ZIP:30331-1098
Country:US
Info Phone Num:800-241-3386
Emergency Phone Num:404-696-2730 404-971-1502
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522
============= Composition/Information on Ingredients =============
Ingred Name:WATER BASE COMPOUNG CONTAINING INGREDIENTS 2, 3, AND 4.
RTECS #:9999999ZZ
Fraction by Wt: >50%
Ingred Name:KEROSENE
CAS:8008-20-6
RTECS #:OA5500000
Ingred Name:TALL OIL
CAS:61790-12-3
Ingred Name:TERPINEOL
CAS:8006-39-1
RTECS #:WZ6600000
Ingred Name:SILICA, CRYSTALLINE - TRIPOLI
CAS:1317-95-9
RTECS #:VV7336000
Fraction by Wt: < 50%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: PROLONGED EXPOSURE MAY CAUSE
IRRITATION IN EYES, NOSE, MOUTH, THROAT, AND ON THE SKIN. CHRONIC:
CHRONIC HUMAN HEALTH EFFECTS WOULD NOT BE EXPECTED AS LONG AS GOOD
PERSONAL HYGIENE AND PROPER SA FETY PRECAUTIONS ARE PRACTICED.
Explanation of Carcinogenicity:CRYSTALLINE SILICA: CLASS 2A (IARC)
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.
======================= First Aid Measures =======================
First Aid:EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN. IF
IRRITATION OCCURS, CALL A PHYSICIAN. SKIN: WASH WITH SOAP & WATER.
IF IRRITATION OCCURS, CALL A PHYSICIAN. INHAL: REMOVE TO FRESH AIR.
REST IN HALF UPRIGHT POSITION. SEEK MEDICAL ATTENTION IF
NECESSARY. INGEST: DO NOT INDUCE VOMITING. CONTACT A PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:>125F,>52C
Lower Limits:0.7 %
Upper Limits:1.25 %
Extinguishing Media:CO2, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:AVOID USE OF WATER STREAM. WATER MAY BE USED
TO COOL FIRE EXPOSED CONTAINERS. WEAR NIOSH/MSHA APPROVED SCBA AND
FULL PROTECTIVE EQUIPMENNT .
Unusual Fire/Explosion Hazard:NONE.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION FROM THE AREA.
SWEEP UP WITH INERT ABSORBENT AND WASH AREA WITH WATER. AVOID
RELEASE INTO DRAINS AND WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM OPEN FLAMES AND
EXCESSIVE HEAT.
Other Precautions:WARNING! PRODUCT MAY CONTAIN TRACE AMOUNTS OF SOME
CHEMICALS CONSIDERED BY THE STATE OF CALIFORNIA TO BE CARCINOGENS
OR REPRODUCTIVE TOXICANTS, CALIF PROP (65).
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AVOID BREATHING OF VAPORS. USE ADEQUATE
VENTILATION. IF USING THIS COMPOUND REQUIRES RUBBING, GRINDING OR
MACHINE POLISHING, USE NIOSH/MSHA APPROVED DUST MASK OR OSHA
APPROVED RESPIRATOR WITH DUST FIL TER.
Ventilation:LOCAL OR GENERAL EXHAUST.
Protective Gloves:NEOPRENE, NITRILE, OR POLYVINYL ALCOHOL.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:CLEAN HANDS WITH SOAP AND WATER AFTER EVERY
USAGE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:376F,191C
Vapor Pres:0.01 @ 68F
Vapor Density:8.0
Spec Gravity:1.25
Solubility in Water:SLIGHT
Appearance and Odor:TAN/KEROSENE ODOR.
Percent Volatiles by Volume:<25 WT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND ALKALIES.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDRES, AROMATICS
AND OTHER HYDROCARBONS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.