XEROX CORP -- 1025/1038 RED DEVELOPER, 5R143  -- 6850-00N034562
<pre>=====================  Product Identification  =====================

Product ID:1025/1038 RED DEVELOPER, 5R143
MSDS Date:12/09/1986
FSC:6850
NIIN:00N034562
=== Responsible Party ===
Company Name:XEROX CORP
Address:100 CLINTON AVE S
City:ROCHESTER
State:NY
ZIP:14644
Country:US
Info Phone Num:800-828-6571
Emergency Phone Num:716-422-2177
CAGE:0E6G9
=== Contractor Identification ===
Company Name:XEROX CORP
Address:300 MAIN ST NO 27C
City:EAST ROCHESTER
State:NY
ZIP:14645
Country:US
Phone:800-828-6571; 800-351-2024
CAGE:0E6G9
Company Name:XEROX CORPORATION
Address:100 CLINTON AVE SOUTH
Box:City:ROCHESTER
State:NY
ZIP:14644-1877
Country:US
Phone:800-828-6571/716-422-2177
CAGE:26921

=============  Composition/Information on Ingredients  =============

Ingred Name:RED PIGMENT 48 (BARIUM SALT)
CAS:5280-66-0
Fraction by Wt: <10%

Ingred Name:PROPENE, POLYMERS; (POLYPROPYLENE), (POLYOLEFIN)
CAS:9003-07-4
RTECS #:UD1842000
Fraction by Wt: <5%

Ingred Name:MAGENTA PIGMENT; QUINOACRIDINE DERIVATIVE
Fraction by Wt: <1%

Ingred Name:SILICA GEL (AMORPHOUS SILICA)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: <1%
OSHA PEL:6 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:CARRIER (CONSISTING OF INGREDIENT 2)
Fraction by Wt: >90%

Ingred Name:FERRITE POWDER

Ingred Name:TONER (CONSISTING OF INGREDIENTS 4-9.)
Fraction by Wt: <10%

Ingred Name:STYRENE, ACRYLATE COPOLYMER
CAS:25213-39-2
Fraction by Wt: 60-65%

Ingred Name:ACRYLIC RESINS
Fraction by Wt: 25-30%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50: (ORAL,RAT) >5 G/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THIS MATERIAL HAS BEEN EXTENSIVELY
    TESTED AND EVALUATED BY XEROX CORPORATION. WHEN USED AS INTENDED,
    IT DOES NOT PRESENT ANY KNOWN HEALTH OR SAFETY HAZARDS. EYE: NOT AN
    IRRITANT. SKIN: NOT A SENSITIZE R. NOT AN IRRITANT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MINIMAL RESPIRATORY TRACT IRRITATION MAY OCCUR
    AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY NON-TOXIC DUST.
Medical Cond Aggravated by Exposure:NONE WHEN USED AS DESCRIBED BY
    PRODUCT LITERATURE.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN: WASH WITH
    SOAP AND WATER. INHAL: REMOVE FROM EXPOSURE. INGEST: DILUTE STOMACH
    CONTENTS WITH SEVERAL GLASSES OF WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:AVOID INHALATION OF SMOKE. WEAR NIOSH/MSHA
    APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TONER IS A COMBUSTIBLE POWDER. WHEN
    DISPERSED IN AIR, IT FORMS EXPLOSIVE MIXTURES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF SPILLED, SWEEP UP OR VACUUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED IN XEROX
    EQUIPMENT. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
    OF CONCERN .
Ventilation:NONE REQUIRED WHEN USED AS INTENDED IN XEROX EQUIPMENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES 
Other Protective Equipment:FOR USE OTHER THAN NORMAL CONSUMER-OPERATING
    PROC (SUCH AS IN BULK TONER PROCESSING FACIL), GOGG & RESP MAY BE
    REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Appearance and Odor:RED GRANULAR/FIANT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PRODUCTS OF COMBUSTION ARE TOXIC.
    AVOID BREATHING SMOKE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:NO SPECIAL DISPOSAL PROCEDURES. INSURE
    CONFORMITY WITH FEDERAL, STATE OR LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.