VERSACHEM CORP -- ANTI-SEIZE & THREAD LUBRICANT, 13109 -- 8030-00N084042
===================== Product Identification ===================== Product ID:ANTI-SEIZE & THREAD LUBRICANT, 13109 MSDS Date:01/01/1994 FSC:8030 NIIN:00N084042 === Responsible Party === Company Name:VERSACHEM CORP Address:6643 42ND TERRACE NORTH City:WEST PALM BEACH State:FL ZIP:33407 Country:US Info Phone Num:800-327-6880 Emergency Phone Num:407-845-2425 Preparer's Name:RONALD J. COSTELLO CAGE:GO599 === Contractor Identification === Company Name:VERSACHEM CORP Address:6643 42ND TER N City:WEST PALM BEACH State:FL ZIP:33407 Country:US Phone:407-845-2425/407-845-2504 FAX CAGE:GO599 Company Name:VERSACHEM CORPORATION Address:6643 42ND TERRACE NORTH Box:City:WEST PALM BEACH State:FL ZIP:33407 Country:US Phone:561-845-2425 CAGE:0FY40 ============= Composition/Information on Ingredients ============= Ingred Name:LITHIUM GREASE Fraction by Wt: 60-65% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:GRAPHITE CAS:7782-42-5 RTECS #:MD9659600 Fraction by Wt: <5% OSHA PEL:15 MPPCF ACGIH TLV:2 MG/M3 RDUST Ingred Name:COPPER (SARA 313) (CERCLA) CAS:7440-50-8 RTECS #:GL5325000 Fraction by Wt: 30-35% OSHA PEL:0.1MG/M3 FUME;1 DUST ACGIH TLV:0.2 MG/M3 FUME EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:SILICON DIOXIDE CAS:14808-57-0 Fraction by Wt: <5% OSHA PEL:N/K ACGIH TLV:N/K ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:PROLONGED OR REPEATED CONTACT MAY CAUSE SOME IRRITATION. TOXICITY: RELATIVELY NON-TOXIC AND NON-IRRITATING. INHALATION OF GRAPHITE DUST HAS BEEN SHOWN TO CAUSE PULMONARY EFFECTS. IT HAS ALSO BEEN SHOW N TO CAUSE REPRODUCTIVE EFFECTS IN EXPERIMENTAL ANIMALS BY INJECTION BENEATH THE SKIN. COPPER HAS BEEN (EFTS OF OVEREXP) Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:HLTH HAZ: SHOWN TO CAUSE TUMORS IN EXPERIMENTAL ANIMALS BY IMPLANTATION BENEATH SKIN AND REPRODUCTIVE EFFECTS BY HIGH DOSE INGESTION. INHALATION OF SILICON DIOXIDE DUST HAS BEEN SHOWN TO CAUSE PULMONA RY EFFECTS. IT IS MANUFACTURER'S JUDGMENT THAT W/PROPER PRECAUTIONS NORMAL USE OF THIS PRODUCT POSES NO SUCH HAZARDS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . INGEST: INDUCE VOMITING. OBTAIN MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:OC Flash Point:>300F,>149C Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL. Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:NONE KNOWN. ================== Accidental Release Measures ================== Spill Release Procedures:SOAK UP WITH INERT ABSORBENT. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:OBSERVE NORMAL SAFETY PRECAUTIONS. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN . Ventilation:NORMAL VENTILATION IS ADEQUATE. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES . Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:>300F,>149C Spec Gravity:1.16 Solubility in Water:NEGLIGIBLE Appearance and Odor:GRAY GREASE; PETROLEUM ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZERS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:NONE KNOWN. ==================== Disposal Considerations ==================== Waste Disposal Methods:LANDFILL OR INCINERATE ACCORDING TO EPA, FEDERAL, STATE AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.