DYNATRON/BONDO CORPORATION -- 321 PLASTIC THINNER -- 8010-00N019648
===================== Product Identification ===================== Product ID:321 PLASTIC THINNER MSDS Date:05/30/1988 FSC:8010 NIIN:00N019648 === Responsible Party === Company Name:DYNATRON/BONDO CORPORATION Address:3700 ATLANTA INDUSTRIAL PARKWAY N W City:ATLANTA State:GA ZIP:30331-1098 Country:US Info Phone Num:800-241-3386 Emergency Phone Num:404-696-2730 404-971-1502 Preparer's Name:S ABDUL RAZZAK CAGE:16522 === Contractor Identification === Company Name:BONDO/MAR-HYDE CORP Address:3700 ATLANTA INDUSTRIAL PKWY NW Box:City:ATLANTA State:GA ZIP:30331 Country:US Phone:404-696-2730 CAGE:16522 ============= Composition/Information on Ingredients ============= Ingred Name:DIETHYLENE GLYCOL, MALEIC ANHYDRIDE POLYMER; UNSATURATED POLYESTER RESIN CAS:26123-45-5 Fraction by Wt: > 50% Ingred Name:STYRENE, MONOMER (SARA III) CAS:100-42-5 RTECS #:WL3675000 Fraction by Wt: < 50% OSHA PEL:100 PPM ACGIH TLV:S,50PPM/100STEL;9293 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO Health Hazards Acute and Chronic:ACUTE: EYE AND UPPER RESPIRATORY IRRITATION FROM VAPOR INHALATION. MINOR SKIN IRRITATION FROM CONTACT WITH MATERIAL. CHRONIC: MAY FEEL DRUGGRED, BECOME SLEEPY OR UNCONSCIOUS. REPEATED SKIN CONTACT MAY CAUSE RASH, WITH PROLONGED EXPOSURE POSSIBLY DEVELOPING TO DERMATITIS. IF ECZEMATOUS DEVELOPS, THIS(EFTS OF OVEREXP) Explanation of Carcinogenicity:STYRENE: CLASS 2B (IARC) Effects of Overexposure:HLTH HAZ: MOST OFTEN OCCURS ON THE BACK OF HANDS, WRISTS AND FOREARMS. Medical Cond Aggravated by Exposure:INDIVIDUALS W/CHRONIC RESPIRATORY CONDITIONS (I.E., ASTHMA, CHRONIC BRONCHITIS, EMPHYSEMA, ETC.) MAY BE ADVERSELY AFFECTED BY ANY FUME OR AIRBORNE PARTICULATE MATTER. ======================= First Aid Measures ======================= First Aid:EYES:FLUSH W/LRG AMTS OF H2O FOR AT LEAST 15 MIN, LIFTING UPPER & LOWER LIDS OCCASIONALLY. SEEK MED AID. SKIN:REMOVE CONTAM CLTHG. WASH SKIN THORO W/SOAP & WATER. IF IRRIT OCCURS, SEEK MED AID. INHAL: REMOVE FROM EXPOSURE. IF BREATHING IS STOPPED OR IS DIFFICULT, GIVE ARTF RESP OR O2 AS INDICATED. SEEK MED AID. IF SYMP OF EXP PERSIST, CONSULT MD. INGEST: DO NOT INDUCE VOMIT. SEEK MED AID. ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Flash Point:SEE INGRED 2 Lower Limits:ING 2 Upper Limits:ING 2 Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL (SMALL FIRES); FOAM AND WATER FOG (LARGE FIRES) Fire Fighting Procedures:COOL CONTAINERS WITH WATER. FIRE FIGHTERS SHOULD WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:HIGH TEMPERATURE EXPOSURE FOR EXTENDED PERIODS OF TIME WILL RESULT IN SPONTANEOUS UNCONTROLLED EXOTHERMIC POLYMERIZATION. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE ALL IGNITION SOURCES & OPEN FLAMES. INCREASE VENTILATION TO MAXIMIZE VAPOR DISPERSAL. DIKE LARGE SPILLS TO PREVENT RUNOFF INTO SEWERS OR WATERWAYS. COVER SPILL WITH INORGANIC ABSORBENT MATERIAL (VERMICULITE). SWEEP UP & PLACE IN LABELED DRUM. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. AVOID EYE CONTACT. STORE IN A COOL, DRY AREA. DO NOT STORE IN DIRECT SUNLIGHT. Other Precautions:WORK W/ADEQ GEN & LOC EXHST VENT TO MINIMIZE EXPOS TO VAPS. BOND & GROUND CNTNRS FOR TRANSFER OF THIS PROD TO PREVENT STATIC SPARKS. STYRENE VAPS ARE UNINHIBITED AND MAY CAUSE BLOCKAGE OF VENTILATION VENTS DUE TO POLYMERIZATION. (SUPP DATA) ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR/DUST RESPIRATOR TO AVOID INHALATION OF EXCESSIVE AIR CONTAMINANTS. Ventilation:LOC EXHST VENT SHOULD BE USED TO CONTROL EMISSION OF AIR CONTAM. GEN DILUTION VENT MAY ASSIST W/REDUCTION OF(SUPP DATA) Protective Gloves:POLYVINYL ALCOHOL & POLYETHYLENE Eye Protection:CHEMICAL WORKERS GOGGLES Other Protective Equipment:SAFETY SHOWERS AND EYE WASH STATIONS SHOULD BE AVAILABLE. Work Hygienic Practices:CLEAN HANDS WITH SOAP AND WATER AFTER EVERY USAGE. Supplemental Safety and Health OTHER PREC: PERIODIC INSPECTION MAY BE NECESSARY TO PREVENT BLOCKAGE. AVOID IMPROPER ADDITION OF PROMOTERS AND OXIDIZING AGENTS. VENT: AIR CONTAMINANT CONCENTRATIONS. ================== Physical/Chemical Properties ================== HCC:F4 Boiling Pt:B.P. Text:SEE ING 2 Vapor Pres:ING 2 Vapor Density:ING 2 Spec Gravity:1.1 Solubility in Water:NEGLIGIBLE Appearance and Odor:CLEAR VISCOUS LIQUID, SHARP STYRENATED ODOR. Percent Volatiles by Volume:< 50 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG ACIDS, PEROXIDES AND OTHER OXIDIZING AGENTS. Stability Condition to Avoid:EXPOSURE TO HEAT, OPEN FLAME Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, LOW MOLECULAR WEIGHT HYDROCARBONS AND ORGANIC ACIDS. Conditions to Avoid Polymerization:HEAT, OPEN FLAME ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.