DYNATRON/BONDO CORPORATION -- LIGHTWEIGHT BODY FILLER FOR 316 BODY REPAIR KIT JUMBO -- 8010-00F021690
===================== Product Identification ===================== Product ID:LIGHTWEIGHT BODY FILLER FOR 316 BODY REPAIR KIT JUMBO MSDS Date:10/22/1988 FSC:8010 NIIN:00F021690 === Responsible Party === Company Name:DYNATRON/BONDO CORPORATION Address:3700 ATLANTA INDUSTRIAL PARKWAY N W City:ATLANTA State:GA ZIP:30331-1098 Info Phone Num:(404) 696-2730 OR 1-800-241-3386 Emergency Phone Num:(404) 971-1502 Preparer's Name:S ABDUL RAZZAK CAGE:16522 === Contractor Identification === Company Name:BONDO/MAR-HYDE CORP Address:3700 ATLANTA INDUSTRIAL PKWY NW Box:City:ATLANTA State:GA ZIP:30331 Country:US Phone:404-696-2730 CAGE:16522 ============= Composition/Information on Ingredients ============= Ingred Name:STYRENE, (MONOMER), SUSPECTED ANIMAL CARCINOGEN BY IARC & ACGIH CAS:100-42-5 RTECS #:WL3675000 Fraction by Wt: <20% Other REC Limits:50 PPM OSHA PEL:100 PPM ACGIH TLV:S,50PPM/100STEL;9293 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:TALC (POWDER), (ASBESTOS FREE), TALCUM, MAGNESIUM SILICATE CAS:14807-96-6 RTECS #:WW2710000 Fraction by Wt: <50% OSHA PEL:20 MPPCF ACGIH TLV:2 MG/CUM (RESP DUST) Ingred Name:SODIUM BORATED SILICATE *4/91* CAS:50815-87-7 Ingred Name:DIETHYLENE GLYCOL, MALEIC ANHYDRIDE, PHTHALIC ANHYDRIDE POLYMER *4/91* CAS:26123-45-5 Fraction by Wt: >50% ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO Health Hazards Acute and Chronic:INHALATION: UPPER RESPIRATORY IRRITATION, DRUGGED, SLEEPY OR UNCONSCIOUS. EYES: IRRITATION. SKIN: IRRITATION, RASH, DERMATITIS, & ECZEMATOUS ON THE BACK OF HANDS, WRISTS OR FOREARMS. Explanation of Carcinogenicity:STYRENE IS A SUSPECTED 2B ANIMAL CARCINOGEN. Effects of Overexposure:INHALATION: UPPER RESPIRATORY IRRITATION, DRUGGED, SLEEPY OR UNCONSCIOUS. EYES: IRRITATION. SKIN: IRRITATION, RASH, DERMATITIS, & ECZEMATOUS ON THE BACK OF HANDS, WRISTS & FOREARMS. Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS SUCH AS ASTHMA, CHRONIC BRONCHITITS, EMPHYSEMA, ETC. ======================= First Aid Measures ======================= First Aid:EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. ADMINISTER ARTIFICIAL RESPIRATION OR OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING. OBTAIN ME DICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Lower Limits:1.1% Upper Limits:6.1% Extinguishing Media:CO2, DRY CHEMICAL FOR SMALL FIRES; FOAM & WATER FOG FOR LARGE FIRES. Fire Fighting Procedures:VENT SMOKE & USE GAS MASK OR REMOTE AIR SUPPLY. WEAR A MSHA/NIOSH APPROVED SELF-CONTAINED BREATHING APPARATUS W/PROTECTIVE EQUIPMENT. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE IGNITION SOURCES. INCREASE VENTILATION TO MAXIMIZE VAPOR DISPERSAL. LARGE SPILL: DIKE TO PREVENT RUNOFF INTO SEWERS/WATERWAYS. SHOVEL/WIPE. SWEEP/CLEAN W/INERT MATERIALS SUCH AS SAND, VERMICULI TE & PLACE IN CLOSED CONTAINER FOR WASTE DISPOSAL. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE IN A COOL, DRY AREA. DON'T STORE IN DIRECT SUNLIGHT. WORK W/ADEQUATE GENERAL & LOCAL EXHAUST VENTILATION TO MINIMIZE EXPOSURE TO VAPORS. Other Precautions:AVOID CONTACT W/SKIN/EYES/INHALATION. BOND/GROUND CONTAINERS FOR TRANSFER TO PREVENT STATIC SPARKS. AVOID HEAT, ELECTRICAL EQUIPMENT, SPARKS & OPEN FLAMES. AVOID IMPROPER ADDITION OF PROMOTERS & OXIDI ZING AGENTS. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE A NIOSH/MSHA APPROVED ORGANIC VAPOR/DUST RESPIRATOR. Ventilation:LOCAL EXHAUST: TO CONTROL THE EMISSION OF AIR CONTAMINANTS. GENERAL: MAY ASSIST W/THE REDUCTION OF AIR CONTAMINANTS. Protective Gloves:POLYVINYL ALCOHOL & POLYETHYLENE Eye Protection:SAFETY GLASSES Other Protective Equipment:SAFETY SHOWERS & EYE WASH STATIONS Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. CLEAN HANDS W/SOAP & WATER AFTER EVERY USAGE. Supplemental Safety and Health THIS PRODUCT CONTAINS MATERIALS CLASSIFIED AS NUISANCE PARTICULATES, WHICH MAY BE PRESENT AT HAZARDOUS LEVELS ONLY DURING SANDING OR ABRADING OF THE DRIED FILM. STYRENE VAPORS ARE UNINHIBITED & MAY CA USE BLOCKAGE OF VENTILATION VENTS. PERIODIC INSPECTION IS ADVIDES TO PREVENT BLOCKAGE. ================== Physical/Chemical Properties ================== Spec Gravity:1.05-1.35 Evaporation Rate & Reference:LESS THAN ETHER Solubility in Water:NEGLIGIBLE Appearance and Odor:WHITE PASTE W/STYRENE ODOR. Percent Volatiles by Volume:<20/WT ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG ACIDS, PEROXIDES & OTHER OXIDIZING AGENTS. Stability Condition to Avoid:HEAT, OPEN FLAME, TEMPS >100F, SPARKS OR OTHER SOURCES OF IGNITION. Hazardous Decomposition Products:CO, CO2, LOW MOLECULAR WEIGHT HYDROCARBONS & ORGANIC ACIDS. Conditions to Avoid Polymerization:UNREGULATED CONTACT W/ORGANIC PEROXIDES, EXPOSURE TO HEAT, OPEN FLAME, & STORAGE >100F. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.