BENJAMIN MOORE & CO -- URETHANE ALKYD GLOSS ENAMEL, M22 -- 8010-00N070767
===================== Product Identification ===================== Product ID:URETHANE ALKYD GLOSS ENAMEL, M22 MSDS Date:11/12/1992 FSC:8010 NIIN:00N070767 === Responsible Party === Company Name:BENJAMIN MOORE & CO Address:51 CHESTNUT RIDGE RD City:MONTVALE State:NJ ZIP:07645 Country:US Info Phone Num:201-573-9600 Emergency Phone Num:800-424-9300 (CHEMTREC) CAGE:09585 === Contractor Identification === Company Name:BENJAMIN MOORE & CO Address:51 CHESTNUT RIDGE RD City:MONTVALE State:NJ ZIP:07645 Country:US Phone:201-573-9600 CAGE:09585 Company Name:BENJAMIN MOORE & CO Address:51 CHESTNUT RIDGE RD Box:City:MONTVALE State:NJ ZIP:07645 Country:US Phone:201-573-9600 CAGE:91950 ============= Composition/Information on Ingredients ============= Ingred Name:STODDARD SOLVENT VP: 2 @ 20C CAS:8052-41-3 RTECS #:WJ8925000 Fraction by Wt: 48.4% OSHA PEL:500 PPM ACGIH TLV:100 PPM Ingred Name:XYLENE (SARA 313) (CERCLA) VP: 21 @ 38C CAS:1330-20-7 RTECS #:ZE2100000 Fraction by Wt: 1.9% OSHA PEL:100 PPM ACGIH TLV:100 PPM; 150 STEL EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE) CAS:13463-67-7 RTECS #:XR2275000 Fraction by Wt: 25.5% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST Ingred Name:BENTONITE CLAY CAS:121888-66-2 Fraction by Wt: 1.3% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:SILICA, CRYSTALLINE - QUARTZ; (SILICA, CRYSTALLINE) CAS:14808-60-7 RTECS #:VV7330000 Fraction by Wt: 0.2% OSHA PEL:N/K ACGIH TLV:0.1 MG/M3 RDUST Ingred Name:PERM-YELLOW; (C.I. YELLOW 11741) CAS:6358-31-2 Fraction by Wt: 6.1% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:CLAY (KAOLIN); (HYDROUS ALUM SILICATES) CAS:1332-58-7 RTECS #:GF1670500 Fraction by Wt: 2.5% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:2 MG/M3 TDUST Ingred Name:C.I. PIGMENT GREEN 7; (PHTHALOCYANINE GREEN) CAS:1328-53-6 RTECS #:GE4300000 Fraction by Wt: 1.5% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:C.I. PIGMENT YELLOW 42; (C.I. YELLOW 77492) CAS:51274-00-1 Fraction by Wt: 6.4% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:IRON (III) OXIDE; (IRON OXIDE) CAS:1309-37-1 RTECS #:NO7400000 Fraction by Wt: 9.3% OSHA PEL:10 MG/M3 (FE) ACGIH TLV:5 MG/M3 FUME (FE) Ingred Name:COPPER, (PHTHALOCYANINATO(2-))-; (PIGMENT BLUE) CAS:147-14-8 RTECS #:GL8510000 Fraction by Wt: 1.1% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:CARBON BLACK CAS:1333-86-4 RTECS #:FF5800000 Fraction by Wt: 3.0% OSHA PEL:3.5 MG/M3 ACGIH TLV:3.5 MG/M3 Ingred Name:CALCIUM CARBONATE CAS:1317-65-3 RTECS #:EV9580000 Fraction by Wt: 6.4% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO Health Hazards Acute and Chronic:ACUTE: INHAL: HARMFUL IF INHALED. MAY AFFECT BRAIN/NERVS SYS CAUSING DIZZ, HDCH OR NAUS. EYE/SKIN CNTCT: CAUSES IRRIT. INGEST: IRRIT OF DIGESTIVE TRACT & NERVS SYS DEPRESS (DROW, DIZZ, LOSS OF COORDIN ATION & FATG). ASPIR HAZ: THIS MATL CANENTER LUNGS DURING SWALLOWING/VOMIT & CAUSE LUNG INFLAM & DMG. (EFTS OF OVEREXP) Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ: IARC MONO, SUPP, VOL 7, PG 341, 1987:GROUP 2A. NTP 7TH ANNUAL REPORT ON CARCINS, (SUPDAT) Effects of Overexposure:HLTH HAZ: CHRONIC: SKIN: PRLNGD/RPTD EXPOS MAY CAUSE DERM. INHAL STATEMENT: SANDING DUST INHAL MAY CAUSE LUNG DMG. NOTICE: REPORTS HAVE ASSOC PERM BRAIN & NERVS SYS DMG W/RPTD & PRLNGD OVEREXP TO SOLV S AMONG PERS ENGAGED IN PAINTING TRADE.INTENTIONAL MISUSE BY DELIB CONC & INHAL CONTENTS MAY BE HARMFUL OR FATAL. Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED IN ACCORDANCE WITH SAFE HANDLING AND USE INFORMATION. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE FROM HAZARD AREA, MAINTAIN BREATHING, CALL MD. SKIN: REMOVE WITH SOAP AND WATER. EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CALL MD. INGESTION: DRI NK 1 OR 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITNG. CALL MD. ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Flash Point:113F,45C Lower Limits:1.0% Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG. Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . DO NOT USE WATER STREAM ON BURNING LIQUID. COOL EXPOSED CONTAINERS WITH WATER. Unusual Fire/Explosion Hazard:CLOSED CONTAINER MAY BURST IF EXPOSED TO EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID BREATHING VAPORS. USE NON-SPARKING TOOLS TO RETURN MATERIALS TO CONTAINER. ABSORB RESIDUE WITH FULLER'S EARTH. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:COMBUSTIBLE - KEEP AWAY FROM HEAT AND FLAME. Other Precautions:USE ONLY WITH ADEQUATE VENTILATION. AVOID PROLONGED CONTACT WITH SKIN AND BREATHING OF VAPOR, SPRAY MIST OR SANDING DUST. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INT ERNALLY. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WEAR PROPERLY FITTED VAP/PARTICULATE RESP APPRVD BY NIOSH/MSHA FOR USE W/PAINTS (TC-23C) DURING APPLICATN OR SANDING & UNTIL ALL VAPS & SPRAY MIST ARE EXHAUSTED. IN CONFINED SPACES OR IN SITUATIONS WH ERE CONTINUOUS SPRAY OPERATIONS (SUPDAT) Ventilation:ADEQ TO MAINTAIN WORKING ATM BELOW TLV & LEL. MECH EXHST MAY BE REQD IN CONFINED AREAS. DISCHARGE EXHST ONLY (SUPDAT) Protective Gloves:SOLVENT IMPERMEABLE GLOVES. Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES . Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . CLOTHING ADEQUATE TO PROTECT SKIN. Work Hygienic Practices:REMOVE AND WASH CLOTHING BEFORE REUSE. WASH HANDS BEFORE EATING, SMOKING OR USING WASHROOM. Supplemental Safety and Health % VOLAT: 56.4-60.9. EXPLAN OF CARCIN: 1994:ANTIC TO BE CARCIN. RESP PROT: ARE TYPICAL OR IF PROPER RESP FIT IS NOT POSS, WEAR NIOSH/MSHA APPRVD, POS-PRESS, SUPPLIED AIR RESP (TC-19C). VENT: IN AREA AW AY FROM IGNIT SOURCES. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:>172F,>78C Vapor Pres:SEE INGS Vapor Density:HVR/AIR Spec Gravity:0.90-1.13 Evaporation Rate & Reference:SLOWER THAN ETHER Appearance and Odor:NONE SPECIFIED BY MANUFACTURER. Percent Volatiles by Volume:SUPDAT ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE REASONABLY FORSEEABLE. Stability Condition to Avoid:ELEVATED TEMPERATURES AND BUILD UP OF VAPORS. Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE AND CARBON MONOXIDE. ==================== Disposal Considerations ==================== Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT INCINERATE SEALED CONTAINERS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.